Fire

All of our fire equipment and loose wicks use 100% Para-Aramid fibre.
Generic Para-Aramid is often incorrectly referred to as Kevlar® which was originally created by DuPont in 1965. Only para aramid fibre produce by Dupont can be called Kevlar®. The technical name for Kevlar® is Para-Aramid.
Para-Aramid is a very strong, heat resistant synthetic fibre which is woven into strips and used for all good fire wicks. This is the best known material for fire props and, unlike inferior wicks using glass fibre or even asbestos, it is durable, inert and completely non- toxic in normal use.
Please note: Para-Aramid is heat resistant, not fire proof. To extend the life of your fire wicks we suggest you use only Paraffin. Avoid using alcohol based fuels as these burn at higher temperature and will degrade the wicks faster.

A lot of the cheaper Aramid products on the market have fibreglass mixed in with the kevlar- the fibreglass does not absorb the fuel and tends to turn silver and dry up with time. If this happens, we recommend you replacing your wick with a purer grade of wick.

Click here for fire safety.

Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page
  • Sale
    Flames N Games Fire Staff 100cm / 100mm wicks

    Flames N Games Fire Staff 100cm / 100mm wicks

    1 Review(s)

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than 50cm x 65mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a good size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.



    Please note wicks are a little scruffy

    Fire Staff Spec: Length: 1m, Weight: 380g, Wicks: 2x 50cm x 100mm

    Learn More
    £35.00

    Out of stock

  • Flames N Games Contact Fire Staff 100cm / 100mm wicks

    Flames N Games Contact Fire Staff 100cm / 100mm wicks

    This contact fire staff made by FNG is based on a top quality T6 aluminium shaft. Due to the ultra thick wall of the shaft this fire staff is extremely durable and has a fantastic solid feel!

    This Contact fire staff is specifically designed for the more experienced fire staff spinners specially those who like performing contact moves!

    Fitted with no less than 50cm of top quality Para-Aramid Kevlar fire wick on both ends it will produce a good size flame which will last approx. 6 to 10 minutes depending on the conditions. Unlike other fire staffs on the market this fire staff should not need re-wicking for a very long time!

    The ends of the shaft are blocked with 2 wooden plugs covered in thick heat-resistant aluminium to stop the flames traveling through the tube keeping the shaft's temperature low.

    To finish off this staff the center of the body has a long (40cm) shock absorbing, non-slip, padded hand grip which comes in various different colours.

    THIS FIRE STAFFS IS NOT SUITABLE FOR BEGINNERS!

    Fire Staff Specs:
    Length: 100cm,
    Weight: 700g,
    Wicks: 2x 50cm x 100mm

    Learn More
    £37.00

    Out of stock

  • Flames N Games Fire Staff 140cm / 100mm wicks

    Flames N Games Fire Staff 140cm / 100mm wicks

    1 Review(s)

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than 50cm x 65mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a good size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.

    Fire Staff Spec: Length: 1.4m, Weight: 560g, Wicks: 2x 50cm x 100mm

    Learn More
    £38.00

    Out of stock

  • Flames N Games Fire Staff 160cm / 100mm wicks

    Flames N Games Fire Staff 160cm / 100mm wicks

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than 50cm x 100mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a good size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.

    Fire Staff Spec: Length: 1.6m, Weight: 970g, Wicks: 2x 50cm x 100mm

    Learn More
    £39.99

    Out of stock

  • Flames N Games Contact Fire Staff 120cm / 100mm wicks

    Flames N Games Contact Fire Staff 120cm / 100mm wicks

    This contact fire staff made by FNG is based on a top quality T6 aluminium shaft. Due to the ultra thick wall of the shaft this fire staff is extremely durable and has a fantastic solid feel!

    This Contact fire staff is specifically designed for the more experienced fire staff spinners specially those who like performing contact moves!

    Fitted with no less than 50cm of top quality Para-Aramid Kevlar fire wick on both ends it will produce a good size flame which will last approx. 6 to 10 minutes depending on the conditions. Unlike other fire staffs on the market this fire staff should not need re-wicking for a very long time!

    The ends of the shaft are blocked with 2 wooden plugs covered in thick heat-resistant aluminium to stop the flames traveling through the tube keeping the shaft's temperature low.

    To finish off this staff the center of the body has a long (40cm) shock absorbing, non-slip, padded hand grip which comes in various different colours.

    THIS FIRE STAFFS IS NOT SUITABLE FOR BEGINNERS!

    Fire Staff Specs:
    Length: 120cm,
    Weight: 800g,
    Wicks: 2x 50cm x 100mm

    Learn More
    £40.00

    Out of stock

  • Flames N Games Contact Fire Staff 140cm / 100mm wicks

    Flames N Games Contact Fire Staff 140cm / 100mm wicks

    This contact fire staff made by FNG is based on a top quality T6 aluminium shaft. Due to the ultra thick wall of the shaft this fire staff is extremely durable and has a fantastic solid feel!

    This Contact fire staff is specifically designed for the more experienced fire staff spinners specially those who like performing contact moves!

    Fitted with no less than 50cm of top quality Para-Aramid Kevlar fire wick on both ends it will produce a good size flame which will last approx. 6 to 10 minutes depending on the conditions. Unlike other fire staffs on the market this fire staff should not need re-wicking for a very long time!

    The ends of the shaft are blocked with 2 wooden plugs covered in thick heat-resistant aluminium to stop the flames traveling through the tube keeping the shaft's temperature low.

    To finish off this staff the center of the body has a long (40cm) shock absorbing, non-slip, padded hand grip which comes in various different colours.

    THIS FIRE STAFFS IS NOT SUITABLE FOR BEGINNERS!

    Fire Staff Specs:
    Length: 120cm,
    Weight: 840g,
    Wicks: 2x 50cm x 100mm

    Learn More
    £41.99

    Out of stock

  • Flames N Games Contact Fire Staff 150cm / 100mm wicks

    Flames N Games Contact Fire Staff 150cm / 100mm wicks

    This contact fire staff made by FNG is based on a top quality T6 aluminium shaft. Due to the ultra thick wall of the shaft this fire staff is extremely durable and has a fantastic solid feel!

    This Contact fire staff is specifically designed for the more experienced fire staff spinners specially those who like performing contact moves!

    Fitted with no less than 50cm of top quality Para-Aramid Kevlar fire wick on both ends it will produce a good size flame which will last approx. 6 to 10 minutes depending on the conditions. Unlike other fire staffs on the market this fire staff should not need re-wicking for a very long time!

    The ends of the shaft are blocked with 2 wooden plugs covered in thick heat-resistant aluminium to stop the flames traveling through the tube keeping the shaft's temperature low.

    To finish off this staff the center of the body has a long (40cm) shock absorbing, non-slip, padded hand grip which comes in various different colours.

    THIS FIRE STAFFS IS NOT SUITABLE FOR BEGINNERS!

    Fire Staff Specs:
    Length: 150cm,
    Weight: 920g,
    Wicks: 2x 50cm x 100mm

    Learn More
    £43.99

  • Flames N Games Fire Staff 140cm / double 65mm wicks

    Flames N Games Fire Staff 140cm / double 65mm wicks

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than 50cm x 65mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a good size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.

    Fire Staff Spec: Length: 1.4m, Weight: 540g, Wicks: 4x 50cm x 65mm

    Learn More
    £46.99

    Out of stock

  • Flames N Games Fire Staff 160cm / double 65mm wicks

    Flames N Games Fire Staff 160cm / double 65mm wicks

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than two wraps of 50cm x 65mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a great size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.

    Fire Staff Spec: Length: 1.6m, Weight: 1000g, Wicks: 6x 50cm x 65mm

    Learn More
    £49.99

    Out of stock

  • Sale
    Flames N Games Fire Staff 140cm / triple 65mm wicks

    Flames N Games Fire Staff 140cm / triple 65mm wicks

    Based on a lightweight yet tough aluminium shaft, these fire staffs are great for the more aggressive fire staff spinners as they are much stronger than wooden fire staffs and will not snap but can get bent if they get kicked or stood on. Fitted with no less than 50cm x 65mm of top quality Para-Aramid Kevlar fire wick, each burner will produce a good size flame which should not need re-wicking for years! The ends of the shaft are blocked with 2 wooden plugs which are covered in thick heat-resistant aluminium tape to stop the flames from traveling through the tube. To finish off the staff has a long (40cm) shock absorbing, Non-slip, padded handgrip.

    Fire Staff Spec: Length: 1.4m, Weight: 590g, Wicks: 6x 50cm x 65mm

    Learn More
    £51.99

Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page