Cranks

Grid  List 

6 Item(s)

per page
  • Steel Standard Cotterless Cranks - Chrome

    Steel Standard Cotterless Cranks - Chrome

    Chromed replacement steel cotterless cranks for unicycles. These can either be used to replace damaged cranks or to give a different feel to your unicycle.

    These are the same as fitted on the Trainer unicycles.

    The crank size is the distance from the centre of the axle hole to the centre of the pedal hole.

    The smaller the ratio of the crank length to wheel size the faster the unicycle will go, the larger the more control the unicycle will have.

    In practise:

    16" unicycles can only be fitted with 102mm cranks or shorter or the cranks touch the ground when pedaling.
    20" unicycles: 102 cranks give a smooth fast ride but make idling harder, 127 cranks give more torque and are good for learners and tricks, 152 are too long.
    24" unicycles: 102 cranks are very smooth and should only be considered if you are a speed fiend, 127 cranks are smooth and still quite fast, although are OK for idling, 152 cranks are great for learners.
    26" & 29" unicycles: 102 cranks make a great long distance machine but very hard to idle, 127 cranks are smooth and make a good street machine, 152 cranks are great for standard Muni riding and tricks work, 170 are for the serious trials rider or mountain climber, these give you the ability to go up almost anything!
    36" unicycles: 127 cranks create an extremely fast machine and gives some control for the experienced rider to idle. 152 cranks are standard and should be considered the minimum for all but experienced riders.

    Comes in pairs.

    To remove the cranks you will need a Crank Extractor.

    When replacing cranks be sure to put them on the correct side and tighten securely. Learn More
    £8.99

  • Qu-AX Alloy Cranks

    Qu-AX Alloy Cranks

    1 Review(s)
    Qu-Ax Alloy Cranks - Price is for a pair. As these cranks are (International Splined Interface Standard), they are compatible with all ISIS unicycles. The Alloy material makes them exceptionally strong. Learn More
    £17.00

    Out of stock

  • Qu-AX Cotterless Alloy Cranks

    Qu-AX Cotterless Alloy Cranks

    Qu-Ax Alloy Cranks - Price is for a pair. The Alloy material makes them exceptionally strong. Learn More
    £19.99

  • Qu-Ax ZeroQ Crank

    Qu-Ax ZeroQ Crank

    The ZeroQ crank from Qu-Ax is one of the few crank sets on the market that is built for vigorous jumps and heavy impact. These cranks are compatible with all ISIS hub systems (found on most MUNI and advanced Freestyle unicycles) and will also work with your favorite pedals. The 'ZeroQ' part of the name refers to the amount the crank 'bends' outwards - in this case Zero! That makes this a crank better suited for fast riding. The crank is also wide enough to support feet for some advanced freestyle tricks. Please note that you'll need a crank extractor to remove these from your unicycle. Price is for one pair. Available in 125mm and 145mm. Please select your size below.

    Learn More
    £43.99

    Out of stock

  • Qu-Ax Q-Axle 125mm/145mm Crank Set

    Qu-Ax Q-Axle 125mm/145mm Crank Set

    Qu-Ax really threw away the rule book when they made the new Q-Axle series. Their new fleet of super-duper trials unicycles use a 24mm axle which allows additional hollowing (meaning they're ridiculously light) but still super rigid. This new design means that the cranks are no longer pressed on to the conical axle like the ISIS system. Instead these cranks can be precisely positioned over the axle then clamped firmly closed. This means there is zero wear between the axle and crank and the crank position stays constant. These are highly engineered cranks (with the price to match) but the work of many years R&D from the Qu-Ax team - the leading designers in next-level unicycles. This option also allows the rider to choose between 125mm and 145mm mounting points for their pedals.

    Learn More
    £61.99

  • Qu-Ax QX ZeroQ ISIS Crank - 125mm

    Qu-Ax QX ZeroQ ISIS Crank - 125mm

    The ZeroQ crank from Qu-Ax is one of the few crank sets on the market that is built for vigorous jumps and heavy impact. These cranks are compatible with all ISIS hub systems (found on most MUNI and advanced Freestyle unicycles) and will also work with your favourite pedals. The 'ZeroQ' part of the name refers to the amount the crank 'bends' outwards - in this case Zero! That makes this a crank better suited for fast riding. The Robust Alloy used on these QX series pedals makes them appropriate for Muni, Trials and Street Riding. The edges of the cranks offer a super-wide platform which will facilitate much more advanced flatland tricks - The QX variations of these cranks feature metal inserts for the pedal attachments making them even more durable.

    Please note that you'll need a crank extractor to remove these from your unicycle. Price is for one pair.

    Learn More
    £61.99

    Out of stock

Grid  List 

6 Item(s)

per page