•

Henrys Loop Juggling Club Replacement Handle

Repair, refresh, or build your own custom juggling clubs with this genuine Henrys Loop Club Handle. Fitted as standard on both the Henrys Loop and Loop Grip juggling clubs, this replacement grip allows you to easily swap out a worn or damaged handle at home or on the road.

Please note: This listing is for the handle only and does not include the central wooden dowel. If you need a wooden dowel for a full rebuild or custom assembly, it must be purchased separately.

Technical Specifications

  • Handle Length: 27cm

  • Top Handle Diameter: 2.5cm

  • Bottom Handle Diameter: 1.5cm

  • Compatibility: Henrys Loop, Henrys Loop Grip, and custom club builds

  • Included: 1x Loop Handle (wooden dowel, screws, end caps, and tape sold separately)

How to Replace Your Juggling Club Handle

  1. Use a Phillips screwdriver to unscrew and remove the bottom knob and top end cap from your club.

  2. Peel away the decorative tape securing the central joint between the handle and the club body.

  3. Slide the old handle off your existing wooden dowel and slide the new Henrys Loop handle into place. (Note: On factory-assembled clubs, the original wrap is secured to the dowel with a compressed-air staple, which you will need to carefully pry out before sliding the old handle off).

  4. Re-wrap the central junction using high-grade juggling club tape (avoid standard electrical tape, as the adhesive can ooze in warm weather or direct sunlight).

  5. Reattach the top and bottom ends using the original Henrys screws—these are hardened to withstand heavy drops without snapping and are threaded specifically to protect the wooden dowel.

Workshop & Pro Tips

  • Durability Advice: In our experience, the solid coloured handles offer a longer lifespan than the metallic silver finish, which tends to show wear faster under heavy practice.

  • Fixing Stripped Screw Holes: If you are refurbishing an older club and find the screw spins freely without biting into the wood, insert a wooden matchstick with a drop of wood glue into the hole before driving the screw back in. This simple trick restores a rock-solid hold.

Engineered in Germany, Henrys equipment is trusted worldwide by professional jugglers for its balance, durability, and reliability under intensive daily use.

Henry's

Henrys Loop Juggling Club Replacement Handle - Handle Only

SKU PART-003-HAN-TURQ
£10.00

Henrys Loop Juggling Club Replacement Handle

Repair, refresh, or build your own custom juggling clubs with this genuine Henrys Loop Club Handle. Fitted as standard on both the Henrys Loop and Loop Grip juggling clubs, this replacement grip allows you to easily swap out a worn or damaged handle at home or on the road.

Please note: This listing is for the handle only and does not include the central wooden dowel. If you need a wooden dowel for a full rebuild or custom assembly, it must be purchased separately.

Technical Specifications

  • Handle Length: 27cm

  • Top Handle Diameter: 2.5cm

  • Bottom Handle Diameter: 1.5cm

  • Compatibility: Henrys Loop, Henrys Loop Grip, and custom club builds

  • Included: 1x Loop Handle (wooden dowel, screws, end caps, and tape sold separately)

How to Replace Your Juggling Club Handle

  1. Use a Phillips screwdriver to unscrew and remove the bottom knob and top end cap from your club.

  2. Peel away the decorative tape securing the central joint between the handle and the club body.

  3. Slide the old handle off your existing wooden dowel and slide the new Henrys Loop handle into place. (Note: On factory-assembled clubs, the original wrap is secured to the dowel with a compressed-air staple, which you will need to carefully pry out before sliding the old handle off).

  4. Re-wrap the central junction using high-grade juggling club tape (avoid standard electrical tape, as the adhesive can ooze in warm weather or direct sunlight).

  5. Reattach the top and bottom ends using the original Henrys screws—these are hardened to withstand heavy drops without snapping and are threaded specifically to protect the wooden dowel.

Workshop & Pro Tips

  • Durability Advice: In our experience, the solid coloured handles offer a longer lifespan than the metallic silver finish, which tends to show wear faster under heavy practice.

  • Fixing Stripped Screw Holes: If you are refurbishing an older club and find the screw spins freely without biting into the wood, insert a wooden matchstick with a drop of wood glue into the hole before driving the screw back in. This simple trick restores a rock-solid hold.

Engineered in Germany, Henrys equipment is trusted worldwide by professional jugglers for its balance, durability, and reliability under intensive daily use.
£10.00

Henry's

Henrys Loop Juggling Club Replacement Handle - Handle Only

SKU PART-003-HAN-TURQ
£10.00
Henrys Loop Juggling Club Replacement Handle - Handle Only

Product Description

Henrys Loop Juggling Club Replacement Handle

Repair, refresh, or build your own custom juggling clubs with this genuine Henrys Loop Club Handle. Fitted as standard on both the Henrys Loop and Loop Grip juggling clubs, this replacement grip allows you to easily swap out a worn or damaged handle at home or on the road.

Please note: This listing is for the handle only and does not include the central wooden dowel. If you need a wooden dowel for a full rebuild or custom assembly, it must be purchased separately.

Technical Specifications

  • Handle Length: 27cm

  • Top Handle Diameter: 2.5cm

  • Bottom Handle Diameter: 1.5cm

  • Compatibility: Henrys Loop, Henrys Loop Grip, and custom club builds

  • Included: 1x Loop Handle (wooden dowel, screws, end caps, and tape sold separately)

How to Replace Your Juggling Club Handle

  1. Use a Phillips screwdriver to unscrew and remove the bottom knob and top end cap from your club.

  2. Peel away the decorative tape securing the central joint between the handle and the club body.

  3. Slide the old handle off your existing wooden dowel and slide the new Henrys Loop handle into place. (Note: On factory-assembled clubs, the original wrap is secured to the dowel with a compressed-air staple, which you will need to carefully pry out before sliding the old handle off).

  4. Re-wrap the central junction using high-grade juggling club tape (avoid standard electrical tape, as the adhesive can ooze in warm weather or direct sunlight).

  5. Reattach the top and bottom ends using the original Henrys screws—these are hardened to withstand heavy drops without snapping and are threaded specifically to protect the wooden dowel.

Workshop & Pro Tips

  • Durability Advice: In our experience, the solid coloured handles offer a longer lifespan than the metallic silver finish, which tends to show wear faster under heavy practice.

  • Fixing Stripped Screw Holes: If you are refurbishing an older club and find the screw spins freely without biting into the wood, insert a wooden matchstick with a drop of wood glue into the hole before driving the screw back in. This simple trick restores a rock-solid hold.

Engineered in Germany, Henrys equipment is trusted worldwide by professional jugglers for its balance, durability, and reliability under intensive daily use.

Customers also bought

    Complementary products