•

Henrys Pirouette Juggling Club Replacement Handle & Dowel Assembly

Restore your worn juggling clubs or build your own custom setup with an authentic Henrys Pirouette Replacement Handle. Pre-assembled directly onto its central wooden dowel, this official spare part is the exact wrapped grip fitted as standard on Henrys Pirouette and Henrys Pirouette Grip juggling clubs.

Because Henrys attaches the wrapped handle to the dowel at the factory using industrial compressed-air staplers, the handle and dowel are supplied together as a single, ready-to-install unit. You do not need any specialist workshop machinery to refurbish your props—just a standard Phillips screwdriver and quality decorative or electrical tape.

Key Features & Compatibility

  • Factory Pre-Assembled: Comes complete with the rolled plastic grip already secured to the central wooden dowel for straightforward home installation.

  • Official Henrys Spare Part: Designed specifically for repairing Henrys Pirouette and Pirouette Grip models, or for custom-building Pirouette-style clubs.

  • Colour & Durability Note: Available in a range of finishes. Please note that coloured handles generally offer a longer lifespan than metallic silver handles, which tend to show surface wear more quickly under heavy use.

How to Replace Your Juggling Club Handle

  1. Remove the Ends: Using a Phillips screwdriver, unscrew the bottom knob first, followed by the top cap.

  2. Strip the Centre Tape: Carefully peel away the decorative tape around the middle junction where the handle meets the club body.

  3. Swap the Assembly: Slide out the old handle and dowel, then fit your new Henrys Pirouette handle assembly into place.

  4. Re-tape the Centre: Secure the central joint with high-quality tape. Tip: Avoid cheap vinyl tapes, as the adhesive can soften and "ooze" in warm weather or direct sunlight.

  5. Reattach the Knob and Cap: Fasten the top and bottom pieces back onto the dowel.

Pro Maintenance & Repair Tips

  • Always Reuse Original Henrys Screws: Do not substitute standard hardware screws. Henrys uses high-tensile screws engineered to withstand repeated drops directly onto the knob without snapping, and swapping thread types can strip the internal wood.

  • Fixing Stripped Screw Holes: On older, well-loved clubs, the screw may spin freely without biting into the worn wood. To fix this, place a plain wooden matchstick into the hole with a drop of wood glue, trim it flush, and drive the original screw back in for a solid, like-new hold.

Henry's

Henrys Pirouette Replacement Handle & Dowel

SKU PART-001-PIR-HAN-PNK
£22.99

Henrys Pirouette Juggling Club Replacement Handle & Dowel Assembly

Restore your worn juggling clubs or build your own custom setup with an authentic Henrys Pirouette Replacement Handle. Pre-assembled directly onto its central wooden dowel, this official spare part is the exact wrapped grip fitted as standard on Henrys Pirouette and Henrys Pirouette Grip juggling clubs.

Because Henrys attaches the wrapped handle to the dowel at the factory using industrial compressed-air staplers, the handle and dowel are supplied together as a single, ready-to-install unit. You do not need any specialist workshop machinery to refurbish your props—just a standard Phillips screwdriver and quality decorative or electrical tape.

Key Features & Compatibility

  • Factory Pre-Assembled: Comes complete with the rolled plastic grip already secured to the central wooden dowel for straightforward home installation.

  • Official Henrys Spare Part: Designed specifically for repairing Henrys Pirouette and Pirouette Grip models, or for custom-building Pirouette-style clubs.

  • Colour & Durability Note: Available in a range of finishes. Please note that coloured handles generally offer a longer lifespan than metallic silver handles, which tend to show surface wear more quickly under heavy use.

How to Replace Your Juggling Club Handle

  1. Remove the Ends: Using a Phillips screwdriver, unscrew the bottom knob first, followed by the top cap.

  2. Strip the Centre Tape: Carefully peel away the decorative tape around the middle junction where the handle meets the club body.

  3. Swap the Assembly: Slide out the old handle and dowel, then fit your new Henrys Pirouette handle assembly into place.

  4. Re-tape the Centre: Secure the central joint with high-quality tape. Tip: Avoid cheap vinyl tapes, as the adhesive can soften and "ooze" in warm weather or direct sunlight.

  5. Reattach the Knob and Cap: Fasten the top and bottom pieces back onto the dowel.

Pro Maintenance & Repair Tips

  • Always Reuse Original Henrys Screws: Do not substitute standard hardware screws. Henrys uses high-tensile screws engineered to withstand repeated drops directly onto the knob without snapping, and swapping thread types can strip the internal wood.

  • Fixing Stripped Screw Holes: On older, well-loved clubs, the screw may spin freely without biting into the worn wood. To fix this, place a plain wooden matchstick into the hole with a drop of wood glue, trim it flush, and drive the original screw back in for a solid, like-new hold.
£22.99

Henry's

Henrys Pirouette Replacement Handle & Dowel

SKU PART-001-PIR-HAN-PNK
£22.99
Henrys Pirouette Replacement Handle & Dowel

Product Description

Henrys Pirouette Juggling Club Replacement Handle & Dowel Assembly

Restore your worn juggling clubs or build your own custom setup with an authentic Henrys Pirouette Replacement Handle. Pre-assembled directly onto its central wooden dowel, this official spare part is the exact wrapped grip fitted as standard on Henrys Pirouette and Henrys Pirouette Grip juggling clubs.

Because Henrys attaches the wrapped handle to the dowel at the factory using industrial compressed-air staplers, the handle and dowel are supplied together as a single, ready-to-install unit. You do not need any specialist workshop machinery to refurbish your props—just a standard Phillips screwdriver and quality decorative or electrical tape.

Key Features & Compatibility

  • Factory Pre-Assembled: Comes complete with the rolled plastic grip already secured to the central wooden dowel for straightforward home installation.

  • Official Henrys Spare Part: Designed specifically for repairing Henrys Pirouette and Pirouette Grip models, or for custom-building Pirouette-style clubs.

  • Colour & Durability Note: Available in a range of finishes. Please note that coloured handles generally offer a longer lifespan than metallic silver handles, which tend to show surface wear more quickly under heavy use.

How to Replace Your Juggling Club Handle

  1. Remove the Ends: Using a Phillips screwdriver, unscrew the bottom knob first, followed by the top cap.

  2. Strip the Centre Tape: Carefully peel away the decorative tape around the middle junction where the handle meets the club body.

  3. Swap the Assembly: Slide out the old handle and dowel, then fit your new Henrys Pirouette handle assembly into place.

  4. Re-tape the Centre: Secure the central joint with high-quality tape. Tip: Avoid cheap vinyl tapes, as the adhesive can soften and "ooze" in warm weather or direct sunlight.

  5. Reattach the Knob and Cap: Fasten the top and bottom pieces back onto the dowel.

Pro Maintenance & Repair Tips

  • Always Reuse Original Henrys Screws: Do not substitute standard hardware screws. Henrys uses high-tensile screws engineered to withstand repeated drops directly onto the knob without snapping, and swapping thread types can strip the internal wood.

  • Fixing Stripped Screw Holes: On older, well-loved clubs, the screw may spin freely without biting into the worn wood. To fix this, place a plain wooden matchstick into the hole with a drop of wood glue, trim it flush, and drive the original screw back in for a solid, like-new hold.

Customers also bought

    Complementary products